1-800-347-5423 M-F 8:00AM - 5:00PM EST
 

Globe Food Equipment Company has made available a Free Improvement Kit to enhance slicer cleaning (Available for Globe models 3600, 3850, 3975, 4600, 4850, & 4975 manufactured between 1999 & 2007 only)

NO COST TO YOU. NO SHIPPING CHARGES.

Click HERE to order your Globe Slicer Improvement Kit.

Information obtained in this form will only be used to fill your Slicer Order Kit request. No information will be given to a third party. Please fill out the submittal form in its entirety. Thank you.

ABOUT THE GLOBE SLICER KIT:

GET THE GLOBE IMPROVEMENT KIT TODAY!

Globe's Improvement Kit is available at no charge. It enhances the cleaning of the knife cover for Globe models: 3600, 3850, 3975, 4600, 4850, and 4975 manufactured between 1999 and 2007.

REASON FOR THE IMPROVEMENT KIT

Globe slicer models - 3600, 3850, 3975, 4600, 4850, and 4975, manufactured between 1999 and 2007, contain a white plastic part on the inside of the knife cover which contains a magnet to prevent slicer activation when the knife cover is removed.  The slicer cannot be used without this plastic part attached to the machine.  As originally manufactured, the white plastic part is sealed with food-grade and approved silicone to eliminate any seams.  Over time, and with the use of harsh cleaning solutions, the silicone may degrade and leave an area that can be more difficult to clean.  Although the existing plastic part can be removed, it requires an Allen wrench which may not always be available.

KIT CONTENTS

Globe's new slicer kit includes tools and instructions for owners on how to remove the existing part, and after thoroughly cleaning and sanitizing the cover, how to replace the old part with the new removable white plastic part.  The new part is designed to be easily removed for cleaning and reinstalled using the tools provided.  The time to install the kit should take less than ten minutes.

HOW DO I GET THE KIT?

The improvement kit is available free of charge to current owners of the above-listed Globe models.  To order a kit, slicer owners can submit an order form right from this page. Please have the slicer(s) model and serial numbers ready to enter, along with your name, business name, and the complete address where the slicer is located.  Once the slicer identification and location are confirmed, one kit for each slicer will be mailed to the requesting owner.

Click HERE to order your Globe Slicer Improvement Kit.

Information obtained in this form will only be used to fill your Slicer Order Kit request. No information will be given to a third party. Please fill out the submittal form in its entirety. Thank you.

Easy to install instructions can be found here.

SAFETY FIRST

Always properly clean and sanitize your slicer in accordance with health and safety regulations and manufacturer's instructions.

Add these updated slicer cleaning instructions to your existing Owner's Manual.